direkt zum Inhalt springen

direkt zum Hauptnavigationsmenü

Sie sind hier

TU Berlin

Inhalt des Dokuments

Publikationen 2018

Artinov, A., M. Bachmann, and M. Rethmeier. "Equivalent heat source approach in a 3D transient heat transfer simulation of full-penetration high power laser beam welding of thick metal plates." International Journal of Heat and Mass Transfer (2018). ScienceDirect [1]

Artinov, A., Bakir, N., Bachmann, M., Gumenyuk, A., and Rethmeier, M. (2018). Weld pool shape observation in high power laser beam welding. Procedia CIRP, 74, 683-686.ScienceDirect [2]

Bakir, N., Gumenyuk, A., and Rethmeier, M. (2018). Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique. Science and Technology of Welding and Joining, 23(3), 234-240. Taylor and Francis [3]

A.M. El-Batahgy, A. Gumenyuk, S. Gook, M. Rethmeier, "Comparison between GTA and laser beam welding of 9%Ni steel for critical cryogenic applications", Journal of Materials Processing Technology (2018). ScienceDirect [4]

Biegler, M., Marko, A., Graf, B., and Rethmeier, M., "Finite element analysis of in-situ distortion and bulging for an arbitrarily curved additive manufacturing directed energy deposition geometry", Additive Manufacturing, Vol 24, 264-272 (2018). ScienceDirect [5], Volltext [6]

Biegler, M., B. Graf, and M. Rethmeier. "In-situ distortions in LMD additive manufacturing walls can be measured with digital image correlation and predicted using numerical simulations." Additive Manufacturing (2018). ScienceDirect [7]

Brunner-Schwer, C., Kersting, R., Graf, B., and Rethmeier, M. (2018). Laser-plasma-cladding as a hybrid metal deposition-technology applying a SLM-produced copper plasma nozzle. Procedia CIRP, 74, 738-742.ScienceDirect [8]

Fabry, C., Pittner, A. and Rethmeier, M., "Design of neural network arc sensor for gap width detection in automated narrow gap GMAW", Weld World (2018). SpringerLink [9], Springer Volltext [10]

Frei, J., Alexandrov, B.T. and Rethmeier, M., 2018. Low heat input gas metal arc welding for dissimilar metal weld overlays part II: the transition zone. Welding in the World, pp.1-8. SpringerLink [11]

Frei, J., and Rethmeier, M. (2018). Susceptibility of electrolytically galvanized dual-phase steel sheets to liquid metal embrittlement during resistance spot welding. Welding in the World, 62(5), 1031-1037. SpringerLink [12]

Fritzsche, A., Hilgenberg, K., Teichmann, F., Pries, H., Dilger, K., and Rethmeier, M. (2018). Improved degassing in laser beam welding of aluminum die casting by an electromagnetic field. Journal of Materials Processing Technology, 253, 51-56.. ScienceDirect [13]

Gook, S. E., A. V. Gumenyuk, and Rethmeier Michael. "Orbital hybrid laser-arc welding using a high-power fibre laser for pipeline construction." Глобальная ядерная безопасность 1 (26) (2018).

Graf, B., Marko, A., Petrat, T., Gumenyuk, A., and Rethmeier, M. (2018). 3D laser metal deposition: process steps for additive manufacturing. Welding in the World, 1-7. SpringerLink [14]

Häberle, N., Pittner, A., Falkenberg, R., Kahlcke, O., and Rethmeier, M., "Application of multi-phase viscoplastic material modelling to computational welding mechanics of grade S960QL steel", Comptes Rendus Mécanique (2018). ScienceDirect [15], Volltext [16]

Lange, F., Artinov, A., Bachmann, M., Rethmeier, M., and Hilgenberg, K. (2018). Numerical simulation of the weld pool dynamics during pulsed laser welding using adapted heat source models Procedia CIRP, 74, 679-682. ScienceDirect [17]

Müller, A., Goecke, S. F., and Rethmeier, M. (2018). Laser beam oscillation welding for automotive applications. Welding in the World, 62(5), 1039-1047.SpringerLink [18]

Muhammad, S., Han, S. W., Na, S. J., Gumenyuk, A., and Rethmeier, M. (2018). Study on the role of recondensation flux in high power laser welding by computational fluid dynamics simulations. Journal of Laser Applications, 30(1) Scitation.org [19]

Neubert, S., Pittner, A., and Rethmeier, M. (2018). Strain-rate controlled Gleeble experiments to determine the stress-strain behavior of HSLA steel S960QL. Materials Testing, 60(7-8), 733-748.Hanser [20]

Petrat, T., Winterkorn, R., Graf, B., Gumenyuk, A., and Rethmeier, M. (2018). Build-up strategies for temperature control using laser metal deposition for additive manufacturing. Welding in the World, 1-9. SpringerLink [21]

Schaumann, P., Rethmeier, M., Schürmann, K., Pittner, A., Dänekas, C., and Schippereit, C. (2018). Automatisierte Fertigung von Hohlprofilknoten für Jacket‐Gründungsstrukturen: Darstellung der schweißtechnischen Prozesskette sowie Berücksichtigung der Prozessparameter beim Ermüdungsnachweis. Stahlbau, 87(9), 897-909. Wiley [22]

Spranger, F., Graf, B., Schuch, M., Hilgenberg, K., and Rethmeier, M. (2018). Build-up strategies for additive manufacturing of three dimensional Ti-6Al-4V-parts produced by laser metal deposition. Journal of Laser Applications, 30(2) Scitation.org [23]

Üstündağ, Ö., Fritzsche, A., Avilov, V., Gumenyuk, A., and Rethmeier, M. (2018). Study of gap and misalignment tolerances at hybrid laser arc welding of thick-walled steel with electromagnetic weld pool support system. Procedia CIRP, 74, 757-760. ScienceDirect [24]

Üstündağ, Ö., Fritzsche, A., Avilov, V., Gumenyuk, A., and Rethmeier, M. (2018). Hybrid laser-arc welding of thick-walled ferromagnetic steels with electromagnetic weld pool support. Welding in the World, 62(4), 767-774.SpringerLink [25]

Üstündag, Ö., Avilov, V., Gumenyuk, A., and Rethmeier, M. (2018, November). Full penetration hybrid laser arc welding of up to 28 mm thick S355 plates using electromagnetic weld pool support. In Journal of Physics: Conference Series (Vol. 1109, No. 1, p. 012015). IOP Publishing.iop.org [26]

Publikationen 2017

Bachmann, M., Carstensen, J., Bergmann, L., dos Santos, J.F., Wu, C.S. and Rethmeier, M., 2017. Numerical simulation of thermally induced residual stresses in friction stir welding of aluminum alloy 2024-T3 at different welding speeds. The International Journal of Advanced Manufacturing Technology, 91(1-4), pp.1443-1452. SpringerLink [27]

Bakir, N., Gumenyuk, A. and Rethmeier, M., 2017. Investigation of solidification cracking susceptibility during laser beam welding using an in-situ observation technique. Science and Technology of Welding and Joining, pp.1-7. Taylor and Francis [28]

Marko, A., Graf, B. and Rethmeier, M., 2017. Statistical analysis of weld bead geometry in Ti6Al4V laser cladding: Comparison of central composite design and five step full factorial test plan. Materials Testing, 59(10), pp.837-843. Hanser [29]

Neubert, S., Andreas Pittner, and Michael Rethmeier. "Influence of non-uniform martensitic transformation on residual stresses and distortion of GMA-welding." Journal of Constructional Steel Research 128 (2017): 193-200. ScienceDirect [30]

Sproesser, G., Chang, Y.J., Pittner, A., Finkbeiner, M. and Rethmeier, M., 2017. Sustainable technologies for thick metal plate welding. In Sustainable Manufacturing (pp. 71-84). Springer International Publishing.SpringerLink [31]

Sproesser, G., Chang, Y.J., Pittner, A., Finkbeiner, M. and Rethmeier, M., 2017. Energy efficiency and environmental impacts of high power gas metal arc welding. The International Journal of Advanced Manufacturing Technology, 91(9-12), pp. 3503-3513. SpringerLink [32]

Sproesser, G., Chang, Y.J., Pittner, A., Finkbeiner, M. and Rethmeier, M., 2017. Environmental energy efficiency of single wire and tandem gas metal arc welding. Welding in the World, 61(4), pp.733-743. SpringerLink [33]

Ward, H., Burger, M., Chang, Y.J., Fürstmann, P., Neugebauer, S., Radebach, A., Sproesser, G., Pittner, A., Rethmeier, M., Uhlmann, E. and Steckel, J.C., 2016. Assessing carbon dioxide emission reduction potentials of improved manufacturing processes using multiregional input output frameworks. Journal of Cleaner Production. ScienceDirect [34]

Publikationen 2016

Avilov, V., Fritzsche, A., Bachmann, M., Gumenyuk, A. and Rethmeier, M., 2016. Full penetration laser beam welding of thick duplex steel plates with electromagnetic weld pool support. Journal of Laser Applications, 28(2), p.022420. Link [35]

Bachmann, M., Avilov, V., Gumenyuk, A. and Rethmeier, M., 2016. Numerical assessment and experimental verification of the influence of the Hartmann effect in laser beam welding processes by steady magnetic fields. International Journal of Thermal Sciences, 101, pp.24-34. ScienceDirect [36]

Bachmann, M., Kunze, R., Avilov, V. and Rethmeier, M., 2016. Finite element modeling of an alternating current electromagnetic weld pool support in full penetration laser beam welding of thick duplex stainless steel plates. Journal of Laser Applications, 28(2), p.022404. Link [37]

Bachmann, M., Rethmeier, M. and Wu, C.S., 2016. Sensitivity analysis of the residual stress state in friction stir welding of high strength aluminum alloy. Materials Testing, 58(1), pp.20-26. Hanser [38]

Bakir, N., Gumenyuk, A. and Rethmeier, M., 2016. Numerical simulation of solidification crack formation during laser beam welding of austenitic stainless steels under external load. Welding in the World, 60(5), pp.1001-1008. SpringerLink [39]

Frei, J., Alexandrov, B.T. and Rethmeier, M., 2016. Low heat input gas metal arc welding for dissimilar metal weld overlays part I: the heat-affected zone. Welding in the World, 60(3), pp.459-473. SpringerLink [40]

Fritzsche, A., Avilov, V., Gumenyuk, A., Hilgenberg, K. and Rethmeier, M., 2016. High power laser beam welding of thick-walled ferromagnetic steels with electromagnetic weld pool support. Physics Procedia, 83, pp.362-372. ScienceDirect [41]

Neubert, S., Pittner, A. and Rethmeier, M., 2016. Experimental determination of TRIP-parameter K for mild-and high-strength low-alloy steels and a super martensitic filler material. SpringerPlus, 5(1), p.754. Volltext [42]

Neubert, S., Pittner, A. and Rethmeier, M., 2016. Numerical sensitivity analysis of TRIP-parameter K on weld residual stresses for steel S355J2+ N. Journal of Thermal Stresses, 39(2), pp.201-219.T&F [43]

Petrat, T., Graf, B., Gumenyuk, A. and Rethmeier, M., 2016. Laser metal deposition as repair technology for a gas turbine burner made of Inconel 718. Physics Procedia, 83, pp.761-768. ScienceDirect [44]

Sproesser, G., Schenker, S., Pittner, A., Borndörfer, R., Rethmeier, M., Chang, Y.J. and Finkbeiner, M., 2016. Sustainable welding process selection based on weight space partitions. Procedia CIRP, 40, pp.127-132. ScienceDirect [45]

Sproesser, G., Pittner, A. and Rethmeier, M., 2016. Increasing performance and energy efficiency of gas metal arc welding by a high power tandem process. Procedia CIRP, 40, pp.642-647. ScienceDirect [46]

------ Links: ------

Zusatzinformationen / Extras

Direktzugang

Schnellnavigation zur Seite über Nummerneingabe

Copyright TU Berlin 2008